DIN EN 16340-2014 Safety and control devices for burners and appliances burning gaseous or liquid fuels – Combustion product sensing devices; English version EN 16340:2014, English translation of DIN EN 16340:2014-10.
This European Standard specifies the safety. construction and performance requirements for combustion product sensing devices intended to be used in combustion control systems. hereinafter referred to as CPSD.
This European Standard applies to sensing devices for the measurement of combustion products from burners and appliances for domestic, commercial and industrial use burning:
— gaseous fuels according to EN 437: or
— liquid fuels having a viscosity at the burner inlet of 1.6 mm2ls (cSt) L43 to 6 mm2ts (cSt) at 20 ‘C. higher boiling petroleum based first raffinates (viscosity greater than 6 mm2 Is), that require prelreating for proper atomisation.
This Eta’opean Standard applies to all types of stationary sensing devices measuring flue gas components 02 CO. CO2. H2, CMy. NOx. SO2 or for a combination of them (multiple gasses)
This European Standard applies also to sensing devices for extractive systems
This European Standard does not cover sensor requirements for combustible gas, combustible gas mixture and oil quality.
2 Normative references
The folowing documents, in whole or In part. are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies
EN 1856-12009, Chimneys- Requirements for metal ctNmrreys – Part 1: Sysfem chimney producfs EN 10088-1:2005, Sfainless sfeels – Part 1: List of stainless sfeels
EN 13611:2007.42:2011, Safely and control devices for gas burners and gas burning appliances – General requirements
EN 14241-1, Chimneys – Elasfomenc seals and elastomeitc sealants – Mafenal requirements and test methods – Part 1: Seats in flue liners
EN 60529:1991, Degrees of pmtecfion provided by enclosures (IP Code) (IEC 60529) 3 Terms and definitions
For the pi,wposes of this document the terms and definitions given in EN 13611:2007+42:2011 and the following apply.
Combustion Product Sensing Device (CPSD)
Combustion Product Sensing Element (CPSE) combined with control unit and a signal conditioner
Note 1 to entry The contusticn produd sensr.g element hereafter relerred to as CPSE.
Note 2 to entry The CPSE contrcl unit andlu the signal conditioner can be niegrated In the contustion control system (see Figure 1).
Note 3 to entry Adcbtlonal components (e-g. heater, flame arrester) used or necessary for operation are considered as parts of the CPSD.DIN EN 16340 pdf download.