DIN 13-26-2005 General purpose ISO metric screw threads – Part 26: Limits of sizes for fine pitch threads with preferred tolerance classes – Nominal thread diameters of 252 mm to 1 000 mm.
1 Scope
This standard applies for ISO general purpose screw threads with a basic profile as in DIN ISO 68-1. It sets out limits of size for fine pitch threads with nominal thread diameters of 252 mm to 1000 mm, with preferred tolerance classes.
2 Normative references
This standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to (including any amendments) applies.
DIN 13-6, General purpose ISO metric screw threads ⎯ Part 6: Nominal sizes for 1,5 mm fine pitch threads with diameters from 12 mm to 300 mm
DIN 13-7, General purpose ISO metric screw threads ⎯ Part 7: Nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm
DIN 13-8, General purpose ISO metric screw threads ⎯ Part 8: Nominal sizes for 3 mm fine pitch threads with diameters from 28 mm to 300 mm
DIN 13-9, ISO general purpose metric screw threads ⎯ Part 9: Nominal sizes for 4 mm fine pitch threads with nominal diameter from 40 mm to 300 mm
DIN 13-10, General purpose ISO metric screw threads ⎯ Part 10: Nominal sizes for 6 mm fine pitch threads with diameters from 70 mm to 500 mm
DIN 13-11, General purpose ISO metric screw threads ⎯ Part 11: Nominal sizes for 8 mm fine pitch threads with diameters from 130 mm to 1 000 mm
DIN 2244, Screw threads ⎯ Terms and screw thread elements for parallel screw threads
DIN ISO 68-1, ISO general purpose screw threads ⎯ Basic profile ⎯ Part 1: Metric screw threads
DIN ISO 965-1, ISO general purpose metric screw threads ⎯ Tolerances ⎯ Part 1: Principles and basic data
DIN ISO 965-3, ISO general purpose metric screw threads ⎯ Tolerances ⎯ Part 3: Deviations for constructional screw threads
3 Terms and definitions
For the purpose of this standard, the terms and definitions used in DIN 2244 shall apply * ).
4 Limits of size
The limits of size for fine pitch threads with preferred tolerance classes (cf. DIN ISO 965-1) have been calculated on the basis of the nominal dimensions as in DIN 13-6 to DIN 13-11, applying the limit deviations and tolerances as in DIN ISO 965-1. Limits of size for threads with tolerance classes not covered in this standard may be calculated using the limit deviations as in DIN ISO 965-3
The limits for the root radius of the external thread are specified in DIN ISO 965-1 as R = 0,144 34 P = H/6 for the maximum limit of size and R min = 0,125 P ≈ H/7 for the minimum limit of size of the minor diameter d 3 DIN 13-26 pdf download.