AS 4024.3004:2021 Safety of machinery Part 3004: Machine tools safety一Presses一Safety requirements for pneumatic presses.
This document, in addition to Iso 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal.
This document deals with all significant hazards relevant for pneumatic presses, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4, have been taken into consideration.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 4413:2010, Hydraulic fluid power — General rules and safety requirements for systems and their components
ISO 12 100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 13849-1:2015, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 16092-1:20 17, Machine tools safety — Presses — Part 1: General safety requirements
ISO 13851:2019, Safety of machinery — Two-hand control devices — Functional aspects and
design principles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12 100:2010, ISO 13849-1:20 15, ISO 16092-1:2017 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www .org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1
restraint valve
device which protects against a gravity fall of the slide/ram
3.2
overall closing time
time interval from the initiation of a slide movement at TDC to the termination of the movement (the closing of tools) at BDC.AS 4024.3004 pdf download.