UL 61058-1-1:2017 Switches for Appliances一Part 1-1: Requirements for Mechanical Switches

UL 61058-1-1:2017 Switches for Appliances一Part 1-1: Requirements for Mechanical Switches.
This clause of part 1 is applicable.
Add the following at the end of Clause 1.
This part of lEG 61058 applies to mechanical switching devices and shall be used in conjunction with the
requirements of lEG 61058-1.
NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 61058.
2 Normative References
This clause of part 1 is applicable.
3 Terms and Definitions
This clause of part 1 is applicable.
4 General Requirements
This clause of part 1 is applicable.
5 General Information on Tests
This clause of part 1 is applicable with the following addition.
Add the following at the end of 5.3.
Table 101 provides information on:
— The minimum number of specimens needed for each test.
— The minimum number of total specimens, when applicable tests are added, needed for each evaluation.
— Additional specimens that may be required as a result of additional electrical rating, unique construction or damage/breakage during testing.
6 Rating
This clause of part 1 is applicable.
7 Classification
This clause of part 1 is applicable.
8 Marking and Documentation
This clause of part 1 is applicable.
9 Protection Against Electric Shock
This clause of part 1 is applicable.
10 Provision for Earthing
This clause of part 1 is applicable.
11 Terminals and Terminations
This clause of part 1 is applicable.
12 Construction
This clause of part 1 is applicable.
13 Mechanism
This clause of part 1 is applicable.
14 Protection Against Ingress of Solid Foreign Objects, Ingress of Water and Humid Conditions
This clause of part 1 is applicable.
15 Insulation Resistance and Dielectric Strength
This clause of part 1 is applicable.
16 Heating
This clause of part us applicable.
17 Endurance
Replace the existing text by the following.UL 61058-1-1 pdf download.