UL 32:2019-07 Metal Waste Cans.
1.1 These requirements cover metal waste cans intended to be employed in factories, garages, workshops, and other locations where there is need for a receptacle for temporary storage inside buildings of oily waste, rags, and other similar combustible waste materials.
1.2 Deleted
2 General
2.1 Units of measurement
2.1.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information.
2.2 Components
2.2.1 Except as indicated in 2.2.2, a component of a product covered by this standard shall comply with the requirements for that component.
2.2.2 A component is not required to comply with a specific requirement that:
a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or
b) Is superseded by a requirement in this standard.
2.2.3 A component shall be used in accordance with its rating established for the intended conditions of use.
2.2.4 Specific components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions.
2.3 Undated references
2.3.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard.
3 Sizes
3.1 Inside diameters, inside heights. and nominal capacities of established trade sizes of cylindrical waste cans are given in Table 3.1. These values are considered examples. Values between the values shown in the table are allowed, provided the minimum and maximum sizes are maintained. See 4.2.UL 32 pdf download.