UL 3030:2018 ANSI/CAN/UL -3030:2018, Unmanned Aircraft Systems.
2.1 A component of a product covered by this Standard shall comply with the requirements for that component.
2.2 A component is not required to comply with a specific requirement that:
a) Involves a feature or characteristic not required in the application of the component in the product covered by this Standard, or
b) Is superseded by a requirement in this Standard.
2.3 A component shall be used in accordance with its rating established for the intended conditions of use.
2.4 Specific components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions.
3 Units of Measurement
3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or
4 Undated References
4.1 Any undated reference to a code or standard appearing in the requirements of this Standard shall be interpreted as referring to the latest edition of that code or standard.
5 Normative References
5.1 Products covered by this standard shall comply with the reference standards noted in this section as appropriate for the country where the product is to be used. When the product is intended for use in more than one country, the product shall comply with the standards for all countries where it is intended to be used.
5.2 The following standards are referenced in this standard, and portions of these referenced standards as identified in this standard may be essential for compliance.
Test Methods for Vulcanized Rubber and Thermoplastic Elastomers — Tension
Specification and Temperature-Electromotive Force (em 1) Tables for Standardized Thermocouples
Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS)
Practice for Maintenance and Continued Airworthiness of Small Unmanned Aircraft Systems (sUAS).UL 3030 pdf download.