UL 2600:2017 CAN/UL 2600:201 7, Relocatable Structures.
1.1 UL 2600 provides the requirements for modular built relocatable temporary structures.
1.2 Relocatable structures for temporary use are a form of modular construction, built in an approved offsite facility, designed to be transported to a location, assembled, and utilized. During the life of these structures they may be used in several different locations.
1.3 The buildings constructed under this standard are permitted to be of combustible construction or noncombustible construction, used singly or in combination,
1 .4 This standard specifies requirements including, but not limited to:
a) National Building Code of Canada objectives:
ii) Health; and
iii) Fire & structural protection of buildings
b) Identification and labelling
1.5 This Standard applies to:
a) A one storey building
I) Without sleeping accommodation, that is not more than 1 200 m2 in building area, and if sprinklered, is not more than 2 400 m2 in building area, and
ii) With sleeping accommodation, that is not more than 600 m2 in building area, and if sprinklered, is not more than 1 200 m2 in building area, and
b) A two storey building
i) Without sleeping accommodation, that is not more than 800 m2 in building area, and if sprinklered, is not more than 1 200 m2 in building area, and
ii) With sleeping accommodation, that is not more than 600 m2 in building area, and if sprinklered, is not more than 900 m2 in building area.
1.6 A building described in Clause 1.5 is permitted to consist of one or more transportable modules specifically designed to be readily relocatable and usable without permanent foundations.
2 Units of Measurement
2.1 Only metric SI units of measurement are used in this Standard. If a va’ue ror measurement is toilowed by a value in other units in parentheses, the second value may be approximate. The first stated value is the requirement.
3 Reference Publications
3.1 See Annex A for a list of publications referenced in this standard. Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. When the latest edition of a standard is not applicable, the appropriate edition is indicated accordingly in Annex A.
4.1 Access to exit – part of a means of egress within a floor area that provides access to an exit serving the floor area.
4.2 Appliance – a device to convert electrical energy or fuel into thermal energy and includes all components, controls, wiring and piping required to be part of the device by the applicable standard referred to in this Standard.
UL 2600 pdf download.