ISO 50021:2019 Energy management and energy savings一General guidelines for selecting energy savings evaluators.
This document gives guidelines for selecting energy savings evaluators to determine ex-post (realized) energy savings for projects, organizations and regions. It gives general principles and identifies the key factors to consider. It also defines roles and responsibilities, recommends the required competence and provides key elements for assessing the knowledge and skills of energy savings evaluators.
At the project and organization level, this document is applicable to both internal and external energy savings evaluators.
Selecting evaluators who calculate predicted energy savings is out of the scope of this document.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1
energy savings
reduction of energy consumption compared to an energy baseline
Note ito entry: Energy savings may be the result of implementation of an action(s) or of autonomous prugless. Note 2 to entry: An evaluation of savings from implementation of actions may need to identify the separate impacts of the actions compared to other factors.
LSOURCE: ISO 17743:2016, 3.8, modified — The notes to entry have been replaced.]
3.2
energy savings evaluation
systematic process to measure, quantify, verify, analyse and report energy savings (311) within a defined boundary
3.3
energy savings evaluator
individual, or a team of people, conducting an energy savings evaluation (3.2)
Note 1 to entry: The internal energy savings evaluator is affiliated with the implementer of the evaluated project or evaluated organizations.
Note 2 to entry: The external energy savings evaluator who is being entrusted or commissioned is not affiliated with the interested parties or entities to be evaluated.
3.4
lead energy savings evaluator
person who is competent to lead and/or review and provides assurance of consistency to relevant requirements of an energy savings evaluation (12)
Note 1 to entry: A lead energy savings evaluator might also take part in an energy savings evaluation.
3.5
selector of energy savings evaluator
entity or personnel appointed by the client to choose an energy savings evaluator
Note 1 to entry: the client is an organization or a person requesting energy savings evaluation (32). The client could be the responsible party, the programme administrator or the interested party.
3.6
objective
results to be achieved
Note 1 to entry: An objective can be strategic, tactical or operational.
Note 2 to entry: Objectives can relate to different disciplines (such as financial, health and safety, and environmental goals) and can apply at different levels (such as strategic, organization-wide, project, product and process).ISO 50021 pdf download.