ISO 20730-1:2021 Road vehicles — Vehicle interface for electronic Periodic Technical Inspection (ePTI) — Part 1: Application and communication requirements.
ePTI system list
list of ePTI-relevant systems (14)
Note I to entry: It contains a basis of defined electronic systems to be tested via the electronic vehicle interface as part of the PT! (Ia). The ePTI system list (Ia) specifies a defined name (system), a unique ID (ePTI system ID) and a description for each ePTI-relevant system.
ePTI system identifier
unique identifier for an ePTI-relevant system (3A)
periodic technical inspection
roadworthiness testing at predelined intervals and authorizea test tacilities
Note ito entry: Roadworthiness testing is part of a wider regime designed to ensure that vehicles are kept in a safe and environmentally acceptable condition during their use.
[SOURCE: DIRECTIVE 2014/45/EC]
vehicle systems and components, that when not operating to their design criteria, affect the safety of the vehicle
system self-test completion status
finalised status of the on-board diagnosis of the ePTI-relevant system(s) 3M
<use case> indication of the relevance of the use case related to the communication between the vehicle’s ePTI-relevant system(s) (3A) and the ePTI external test equipment (3.3) as specified in this document
description of a system’s behaviour as it responds to a request that originates from outside that system
[SOURCE: ISO 15118-1:2019, 3.1.71, modified — The notes to entry have been deleted.]
mandatory if a certain criterion is met
keyword indicating an item that is required to be implemented as defined in this document to claim compliance with this document
[SOURCE: ISO/IEC 14776-113:2002, 3.3.3, modified — The word “standard” has been replaced by “document”.]
keyword indicating that the referenced item is not required to claim compliance with this document
Note ito entry: Implementation of an optional item should be as defined in this document.ISO 20730-1 pdf download.