IEC 61800-1-2021 Adjustable speed electrical power drive systems – Part 1: General requirements – Rating specifications for low voltage adjustable speed DC power drive systems.
This part of IEC 61 800 applies to adjustable speed electric DC power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the DC motors.
It applies to adjustable speed electric power drive systems intended to feed DC motors from a BDM/CDM connected to line-to-line voltages up to and including 1 kV AC 50 Hz or 60 Hz and/or voltages up to and including 1 ,5 kV DC input side.
NOTE 1 Adjustable speed electric AC power drive systems intended to feed AC motors are covered by IEC 61 800-2.
NOTE 2 This document can be used as a reference for adjustable speed electric power drive systems, intended to feed DC motors from a BDM/CDM connected to line-to-line voltages up to and including 1 ,5 kV AC, 50 Hz or 60 Hz and/or voltages up to and including 2,25 kV DC input side.
Traction applications and electric vehicles are excluded from the scope of this document.
This document is intended to define the following aspects of a DC power drive system (PDS):
• principal parts of the PDS;
• ratings and performance;
• specifications for the environment in which the PDS is intended to be installed and operated;
• other specifications which might be applicable when specifying a complete PDS.
This document provides minimum requirements, which may be used for the development of a specification between customer and manufacturer.
Compliance with this document is possible only when each topic of this document is individually specified by the customer developing specifications or by product standard committees developing product standards.
For some aspects which are covered by specific PDS product standards in the IEC 61 800 series, this document provides a short introduction and reference to detailed requirements in these product standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited appli es.
For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60034 (all parts), Rotating electrical machines
IEC 60034-1 :201 7, Rotating electrical machines – Part 1: Rating and performance
IEC 60034-9, Rotating electrical machines – Part 9: Noise limits
IEC TS 60034-25, Rotating electrical machines – Part 25: AC electrical machines used in power drive systems – Application guide
IEC 60038, IEC standard voltages
IEC 60068 (all parts), Environmental testing
IEC 60068-2-27:2008, Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock
IEC 60076 (all parts), Power transformers
IEC 60076-1 , Power transformers – Part 1: General
IEC 60076-6, Power transformers – Part 6: Reactors
IEC 60079 (all parts), Explosive atmospheres
IEC TS 60079-42, Explosive atmospheres – Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment
IEC 601 46-1 -1 :2009, Semiconductor converters – General requirement and line commutated converters – Part 1-1: Specification of basic requirements
IEC 60364 (all parts), Low voltage electrical installations.IEC 61800-1 pdf download.