BS EN 1501-5-2021 Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles

BS EN 1501-5-2021 Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles. 2 Normative references The lollowing documents are referred to in the test in such a way that some or all of their content constitutes requirements ol this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN H18-1:1996+A1:200f1, Short link churn fur lting purposes – Safety – Port 1: Generul conditions of acceptance EN 840-1:2020 MobJle waste and resyding containers- Part 1: Containers wIth 2 wheels with a capacity W to 400 lj’br comb lifting devices. Dimensions and design EN 840-2:2020, Mobik waste and recycling containers- Part 2: Containers wIth 4 wheels wtth a capacity up to 13001 wIth flat hd(s).for trunmon and/or comb lifting devices- Dimensions and design EN 840-3:2020, Mobile waste and recycling containers- Part & Containers wIth 4 wheels with a capacity up to 13001 wIth dome lid(s), fur (ninnion and/or comb hfting devices – Dimensions and design EN 840-4:2020. Mobile waste and recycling containers – Part 4: Containers wIth 4 wheels with a capacity up to 1 7(0)? wIth flat lid(s). fur wide trurlmon or fiG- and/or wide comb lifting devices – Dimensions and design EN 840-5:2020, Mobile waste and recycling containers – Part 5: Performance requirements and test methods EN 840-6:2020, MobIle waste arid recychn9 cant Quiets • Part 6: Safety and health requirements EN 894-1:1997+A1:2008, Safety of machi nety Ergonomics requirements fur the design of displays end control actuators – Pan 1: General prrncaplesfoi- human snterocnons with displctys and control actuators EN 894-2:1997+A1:200€, Softly of machinery- Ergonomics requirements for the design of displays ond control actuators – Part 2: DIsplays EN 894-3:2000-i-Al :2008, Safety of machinery – Ergonomics requirements fur the design o(dispbays and control acrz,ators – Thirt 3: Control actuators EN BJ4-4:20I0, Safety of machinery- Ergonomics requirrnwncs for the design ef deploys and control actuators- Part 4: Location and arrangement of diipiuys and control actuators EN 1501-1:2021, Refuse colkction vehicles- General requirements and safety requirements- Part 1: Rear loaded refuse collection vehicles EN 1501-2:2021. Refuse collection vehicles- Gcne’ml rrquiri-rnencs and safety requirements – Part 2: Side loaded refuse collection vehicles EN 1501-3:2021. Refuse collection vehicles- General requareriwn.ts and safety requirements – Port 3: Front loaded refuse collection vehicles EN 1501-4:2007. Refuse collection vehides and thefr associated lifting devices...