Free Standards Online
NFPA 78-2020 Guide on Electrical Inspections. 6.5.2 The electrical inspector should review the construction documents for administrative deficiencies. 6.5.3 The electrical inspector should review the construction documents for critical deficiencies. 6.5.4 The electrical inspector should review the construction documents for noncritical deficiencies. 6.6 Plans Review Procedures. 6.6.1 The electrical inspector should verify that the construc­ tion documents indicate the construction type and occupancy use. 6.6.2* The electrical inspector should verify that the construc­ tion documents comply with AHJ requirements for the construction type and occupancy use. 6.6.3 The electrical inspector should verify the calculations required by A1IJ requirements in the submitted construction documents. 6.6.4* The electrical inspector should verify compliance with general installation requirements. 6.6.5* The electrical inspector should verify compliance with the requirements for special occupancies, where applicable. 6.6.6* The electrical inspector should verify compliance with the requirements for special equipment, where applicable. 6.6.7* The electrical inspector should verify compliance with the requirements for special conditions, where applicable. 6.6.8* The electrical inspector should verify compliance with the requirements for communications systems, where applica­ ble. 6.6.9* The electrical inspector should verify compliance with the requirements for equipment locations and clearances. 6.6.10* The electrical inspector should verify compliance with the requirements for wiring and protection. 6.6.11* The electrical inspector should verify compliance with the requirements for grounding and bonding. 6.6.12* The electrical inspector should verify compliance with the requirements for wiring methods and materials. 6.6.13* The electrical inspector should verify compliance with the requirements for equipment ratings. 7.1 Scope. This chapter provides a framework for performing field inspection of installed electrical equipment for compli­ ance with AHJ requirements. 7.2 Intended Outcome(s) of the Field Inspection. 7.2.1* The AHJ should establish the intended outcome (s) of the field inspection. 7.2.2* The AHJ should establish the scope and extent of the field inspection. 7.3 Construction Document Submittals. Document submittals should be reviewed in accordance with Chapter 5 and Chap­ ter 6. 7.4 Preparation for Field Inspection. 7.4.1* The electrical inspector should identify the details of the project based on the construction documents, including all AHJ requirements for a field inspection, prior to initiating the inspection process. 7.4.2 The electrical inspector should identify AHJ require­ ments that are applicable to the project. 7.4.3 The electrical inspector should review any historical records for the property, including previous permits and past field inspections. 7.4.4 The electrical inspector should review the approved construction documents on file. 7.4.5...

Download Address

  • Download