AS 19202.1:2021 Summer toboggan runs Part 1: Safety requirements and test methods (ISO 19202-1:2017 (ED.1.0) MOD)

AS 19202.1:2021 Summer toboggan runs Part 1: Safety requirements and test methods (ISO 19202-1:2017 (ED.1.0) MOD). This document specifies the safety requirements for planning of track, design and calculation, manufacturing, erection, testing and commissioning of summer toboggan runs and their components according to Clause 3. Those are sports facilities with an inclined guided downhill track, on which the user passes a difference in height by user’s dependent speed control, to a limited velocity and descending by gravity. Its basic approach is the consciousness that the sledding usually implies for the users a remaining risk, which is comparable with sports activities, e.g. bicycle riding, alpine skiing, rope courses, because a) active independent actions without supervision are necessary on tracks in order to control descents (distance control and braking), and b) posture and balance to ensure the balance between centrifugal and gravitational force are required. This document is applicable to summer toboggan runs and major modification to summer toboggan runs and toboggans manufactured after the effective date of publication. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 9606 (all parts), Qualification testing of welders — Fusion welding ISO 12100:2010, Safety of machinery — General principlesfor design — Risk assessment and risk reduction ISO 13849-1, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design ISO 13857, Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs 150 19202-2, Summer toboggan runs — Part 2: Safety requirements for operation ISO/IEC 17020, Conformity assessment — Requirements for the operation of various types of bodies performing inspection IEC 60364-5-54, Low-voltage electrical installations — Part 5-54: Selection and erection of electrical equipment — Earthing arrangements and protective conductors IEC 61508 (all parts), Functional safety of electrical/electronic/programmable electronic safetyrela ted systems EN 349, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 1090 (all parts), Execution of steel structures and aluminium structures EN 1991 (all parts), Eurocode 1: Actions on structures EN 1993 (all parts), Eurocode 3: Design of steel structures EN 1999-1-1, Eurocode 9: Design of aluminium structures — Part 1-1: General structural...