AS 5238.1:2021 Cranes – Cabins and control stations Part 1: General (ISO 8566-1:2010, MOD)

AS 5238.1:2021 Cranes – Cabins and control stations Part 1: General (ISO 8566-1:2010, MOD). This part of Iso 8566 specifies the general requirements for cabins and control stations from which cranes, as defined in ISO 43 06-1, are operated. It takes the conditions of use of the cabin into consideration. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3795, Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials ISO 4306-1, Cranes — Vocabulary — Part 1: General Iso 5353:1995, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point ISO 7 752-1, Cranes — Controls — Layout and characteristics — Part 1: General principles ISO 11112, Earth-moving machinery — Operator’s seat — Dimensions and requirements ISO 11201, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane IEC 60204-32:2 008, Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 crane cabin space in a crane or in its immediate vicinity which is specially designed, built and equipped for operating the crane 3.2 control device part of the control system of the crane, by means of which the desired control command is conveyed to the operating device 3.3 control element part of a control device, such as push buttons, levers, pedals and switches, the manipulation of which creates the desired control command 3.4 seat index point SIP point on the central vertical plane of seat Note 1 to entry: Adapted from ISO 53 53:1995, definition 3.1. 3.5 control station permanent position of controls on or off the crane 4 Control stations 4.1 The crane operator’s view, when the crane is in the prescribed operating position, shall enable the operator to monitor the movement of the crane and its load.AS 5238.1 pdf download.