BS EN 1034-1-2021 Safety of machinery一Safety requirements for the design and construction of paper making and finishing machines Part 1: Common requirements.
This document specifies safety requirements.
This document is applicable to paper making and paper finishing machines. It contains definitions and requirements that apply to all paper making and paper finishing machines listed in Annex A and is intended to be used in connection with the specific part applicable for the respective machine listed in Annex A. Specific parts can contain additional requirements or deviations from EN 1034-1 in which case the specific stipulations take precedence over the specification made in EN 1034-1. This document deals with the hazards listed in Annex B.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to paper making and paper finishing machines, when they are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer.
This document does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5.
This document is not applicable to paper making and paper finishing machines manufactured before the date of its publication.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitute requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 4413:20 10, Hydraulic fluid power- General rules and safety requirements for systems and their components (ISO 4413:2010)
EN ISO 4414:2010, Pneumatic fluid power – General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 7731:2008, Ergonomics – Danger signals for public and work areas – Auditory danger signals (ISO 7 731:2003)
EN ISO 11688-1:2009, Acoustics – Recommended practice for the design of low-noise machinesy and equipment – Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 12100:2010, Safety of machinery – General principles for design – Risk assessment and risk reduction (iSO 12100:2010)
EN ISO 13732-1:2008, Ergonomics of the thermal environment – Methods br the assessment of human responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 13849-1:2015, Safety of machinery – Safety-related parts of control systems – Parc 2: General principles for design (iSO 13849-1:2015)
EN ISO 13849-2:2012. Safety of machinery – Safety-related parts of control systems – Part 2: Validation (ISO 1 3849-2 :2012)
EN I SO 13850:2015, Safety of machinery – Emergency stop function – Principles for design (ISO 13850:2015)
EN ISO 13854:2019, Safety of machinery. Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017).BS EN 1034-1 pdf download.