AS ISO 24410:2021 Earth-moving machinery一Coupling of attachments to skid steer loaders

AS ISO 24410:2021 Earth-moving machinery一Coupling of attachments to skid steer loaders.
This document provides for the interchangeability of attachments on skid steer loaders by establishing requirements for the quick coupler system including dimensional limits for the attachment mounting frame. These quick couplers are typically used on skid steer loaders as defined in ISO 6165.
NOTE 1 Skid steer loaders can use other styles of quick couplers but the coupler would not be interchangeable with attachments designed to comply with this document.
NOTE 2 The requirements of this document can be applied to quick couplers used on other compact machines.
NOTE 3 Quick couplers used on small skid steer loaders and some compact tool carriers can have a different
width requirement than provided in this document. See Annex B.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, oniy the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6165, Earth-moving machinery — Basic types — Identification and terms and definitions ISO 13031:2016, Earth-moving machinery — Quick couplers — Safety
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6165 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www ,org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1
attachment
assembly of components that can be mounted onto the skid steer loader lift arm for specific use
[SOURCE: ISO 6746-2:2003, 3.5, modified — The term “base machine or equipment” has been replaced with “skid steer loader lift arm”.]
3.2
quick coupler
device mounted on a skid steer loader to allow quick interchange of attachments (3.1)
[SOURCE: ISO 1303 1:2016, 3.1, modified — The term “earth-moving machine” is replaced by “skid steer loader”, and Note 1 to entry is not included here.]
3.3
attachment mounting frame
attachment component that facilitates the quick mounting and removal of an attachment (31) to the quick coupler (3.2).
AS ISO 24410 pdf download.