AASHTO R 77:2016 Standard Practice for Certifying Suppliers of Emulsified Asphalt.
4. SIGNIFICANCE AND USE
4.1. This standard specifies procedures for minimizing disruption of emulsified asphalt shipments and describes a certification system that evaluates quality control and specification compliance tests performed by the supplier on samples obtained prior to shipment.
4.2. The number of emulsified asphalt grades possible under M 140. M 208, or M 316 may require additional storage facilities if the procedure of 4bsamplc and hold while testing” is followed exclusively. The addition of new storage capacity at a facility may be infeasible at some locations. Standardization of procedures that allow shipment under an approved supplier certification system provides the flexibility needed to use existing facilities and to limit any shipment disruptions.
4.3. This standard pro vide.s informatio,i on the Jbllo wing activities:
4.3.1. General requirements that the supplier shall satisfy to achieve approved-supplier status;
4.3.2. Minimum requirements included in a supplier’s quality control plan;
4.3.3. General requirements that the supplier shall require before certification is granted;
4.3.4. Procedure for shipping emulsified asphalt under an approved supplier certification system;
4.3.5. Procedure for agency monitoring of an approved supplier certification system at the shipping facility; and
4.3.6. Procedure for field sampling and testing of emulsi fled asphalt shipped under an approved supplier certification system.
5. HAZARDS
5.1. The safety requirements of the field organization, laboratory organization, and OSHA shall be observed.
6. SAMPLING
6.1. All test samples required by this standard shall be obtained in accordance with R 66 and ASTM D3665. The use of a random sampling procedure is mandatory to the establishment of a valid certification program.
7. TESTING REQUIREMENTS
7.1. Testing required for this standard shall be performed by a laboratory currently accredited by the AASHTO accreditation program (Notes 1 and 2). Agencies may require that the refinery, terminal, or final production site have a quality control laboratory on site with sufficient testing equipment to ensure quality control in day-to-day production.AASHTO R 77 pdf download.