AASHTO M 219:92(2017) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches.
This specification covers corrugated aluminum alloy structural plate used in the construction of pipe. pipe-arches, arches, underpasses. and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels.
This specification does not include requirements for bedding. backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends on the proper selection of plate thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated aluminum structural plate pipe and the proper installation procedures are given in AASHTO LRFD Bridge Design Specifications and the AASHTO LRFD Bridge Construction Specifications. The installation is according to AASI-ITO LRFD Bridge Construction Specfications.
REFERENCED DOCUMENTS
AASHTO Standards:
• M232M/M232. Zinc Coating (Hot-Dip) on Iron and Steel Hardware
• AASHTO FD Bridge Design Specifications
• AA SHTO LRFD Bridge construction Specifications
2.2. ASTM Standards:
• A563M. Standard Specification for Carbon and Alloy Steel Nuts (Metric)
• B209M, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
• B221M. Standard Specification fbr Aluminum and Aluminum-Alloy Extruded Bars. Rods, Wire, Profiles, and Tubes (Metric)
• B666/B666M, Standard Practice for Identification Marking of Aluminum and Magnesium Products
• B695. Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
• E29, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
• F467M, Standard Specification for Nonferrous Nuts for General Use (Metric)
• F46M, Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
• F56M, Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (withdrawn 2012; no replacement)
• F593, Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
• F594, Standard Specification for Stainless Steel Nuts
• F738M, Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs (withdrawn 2015)
• F836M, Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric).AASHTO M 219 pdf download.